ckm series ? ratings from 10a to 30a @ 60 vdc ? slim 22.5mm (width) package ? low leakage mosfet output ? led input status indicator ? dc control ? din rail and panel mount product selection description 10 a 20 a 30 a 4-32 vdc control ckm0610 ckm0620 ckm0630 output specifications (1) description ckm0610 ckm0620 ckm0630 operating voltage [vdc] 0-60 0-60 0-60 maximum off-state leakage current @ rated voltage [marms] 0.1 0.1 0.1 maximum load current [adc] 10 20 30 maximum surge current (10msec) [adc] 30 60 90 maximum on-state voltage drop @ rated current [vdc] 0.2 0.4 0.5 maximum on-state resistance @ rated current (rds-on) [ohms] 0.02 0.018 0.016 input specifications (1) description parameters control voltage range 4.0-32 vdc minimum turn-on voltage 4.0 vdc minimum turn-off voltage 1.0 vdc maximum input current (2) 9 ma @ 5 vdc, 11 ma @ 32 vdc maximum turn-on time [msec] 1.0 maximum turn-off time [msec] 1.0 general specifications description parameters dielectric strength, input/output/base (50/60hz) 2500vrms minimum insulation resistance (@ 500 v dc) 10 9 ohms maximum capacitance, input/output 8 pf ambient operating temperature range -40oc to 80oc ambient storage temperature range -40oc to 125oc status indicator display green led weight (typical) 10 oz. (280g) encapsulation thermally conductive epoxy terminals box clamp type maximum wire size: awg # 10 (3mm) recommended terminal screw torque range: 5.0-6.0 in lb (0.6-0.7 nm) min. side by side spacing 0.8 inch (20mm) general notes 1) all parameters at 25c unless otherwise specified. 2) input circuitry for incorporates active current limiter. note: inductive loads should be diode suppressed.
mechanical specifications thermal derate information agency approvals designed in accordance with the requirements of iec 62314 rev. 090512
annex - enviromental information
|
